Foster Veronika.4F.STD.MF Manuel d'utilisateur télécharger pdf (Page 7)

ENGLISH

INSTALLER INSTRUCTIONS

• The distance of the cooker hob

from the back edge must be at least

50mm;

• The distance of the cooker hob from

the walls that exceed worktop height

must be at least 100 mm;

• Should a hood be installed above

the hob, see the hood assembly

instructions which provide the

correct distance to be respected.

min.650

100

Fig. 3:

cooker hob distances

• Carefully position the supplied in-

sulating gasket along the external

perimeter of the hole created on the

worktop, trying to make it adhere

along the entire surface by slightly

pressing it by hand [Fig. 4].

• Once these operations have been

completed, use the supplied brack-

ets to fasten the hob to the structure.

Refer to the “Fastening the cook-

er hob to the cabinet” paragraph

[Page 26].

Fig. 4:

positioning the insulating gasket

6.2 Installation on the support structure (worktop) of a ﬂush built-in cooker

hob (ﬂush-mount edge)

This type of appliance requires milling on the 1.5 mm deep worktop,

which measurements are indicated in the top drawing, identiﬁable in the section

Gas cooker hobs summary - models with "ﬂush" built-in [Page 182].

The step is necessary to house the cooker hub edge so that it is "ﬂush" with the

worktop.

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

Pas de commentaire

Foster Veronika.4F.STD.MF Manuel d'utilisateur Page 7